Sargent 7300 Series Interchangeable Core Uživatelský manuál stáhnout pdf

FOR ASSISTANCE, CONTACT SARGENT AT 800-727-5477 or www.sargentlock.com

Installation Instructions for 11-(70-73-43)

Small Format Interchangeable Core Cylinders

1. Install cylinder set screw (#12-24), slotted end first in to cylinder housing.

2. Using a 1/8" flat blade screw driver inserted through the "figure 8"

opening, screw the set screw in until the pointed end is just below the

threads on the outside of the cylinder body.

3. Orient the cam upright and install the mortise cylinder housing into the

trim/lockset by turning clockwise.

4. When mortise cylinder housing is installed into the trim/lockset, tighten

the cylinder set screw to fix the mortise cylinder housing in place. Use

caution so that the set screw tightens into the mortise lock case and

does not fall into lock body. This set screw is used with a mortise cylinder

housing to prevent unauthorized removal of the cylinder and lock.

Reproduction in whole or in part without the express written

permission of SARGENT Manufacturing is prohibited.

A7871A

Shrnutí obsahu

Strany 1 - Copyright

FOR ASSISTANCE, CONTACT SARGENT AT 800-727-5477 or www.sargentlock.comInstallation Instructions for 11-(70-73-43)Small Format Interchangeable Core Cyl

Příbuzné modely XC Series

Komentáře k této Příručce

Žádné komentáře

Sargent 7300 Series Interchangeable Core Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Bezpečnost Sargent 7300 Series Interchangeable Core. SARGENT 7300 Series Interchangeable Core User Manual Uživatelská příručka

Shrnutí obsahu

Příbuzné modely XC Series

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnost Sargent 7300 Series Interchangeable Core